10 Best Dac Amp in Australia (2023) [Top Picks]

Features

• Come with 5V USB power supply cable, optical cable, USB type B cable and 18-month warranty; Full metallic shell to ensure high quality
• 160mW RMS(32 ohms, 20 Hz – 20 KHz, 0.01% THD), with bass and treble control can be used as preamp or volume controller for your PC/MAC/Computer
• With USB, optical and coaxial S/PDIF inputs can fit with most home audio system, and RCA output can be connected to amplifier or powered speakers on your desktop; Built-in Hi-Fi headphone amp chip can drive most 16ohm to 200ohm headphones
• Easy to set up, no special software, app, or driver to install, a true plug-and-play digital audio adapter
• Mini Compact D/A converter, stream bit-perfect 24bit/192KHz HD with low jitter, with output protect circuit, safe for your expensive audio system

Features

• If your device supports LDAC transmission, you will get even better experience.
• Bluetooth headphone amp / Bluetooth DAC application： Connect the Bluetooth of the phone, tablet or notebook to DX3 Pro+, and connect the power amplifier, active speakers or headphones to the DX3 Pro+’s output, then DX3 Pro+ becomes your Bluetooth Headphone amp / Bluetooth DAC
• It pairs with high sensitivity IEMs and power hungry high impedance headphones nicely.
• NFCA circuit ：The new DX3 Pro+ has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion
• Pre-amplifier function ：Adapt to different usage scenarios, DX3 Pro+ has 4 output modes: Headphone Amp, Headphone Amp+ Line out, DAC, and Pre amplifier.
• When used with DX3 Pro+, the TRS balanced input can be used to input other audio sources
• PA3s is the best power amplifier for DX3 Pro+： PA3s has RCA+TRS balanced inputs
• The output power of 80W x 2@4Ω, 10%THD+N, 65W X 2@4Ω, 1%THD+N can be adapted to most situations where speakers are used.
• To get even better sound quality from Bluetooth, we abandon the built-in DAC of QCC5125 and connect its digital signal to ES9038Q2M to decode.
• Bluetooth 5.0 LDAC transmission ：DX3Pro+ has the certification of Hi-Res Audio Wireless and LDAC
• It uses newest QCC5125 chipset to support LDAC/AAC/SBC/APTX/APTX LL/APTX HD protocol

Features

• USB Charge & Lower Power InterferenceDS400+ adopts type-c interface to charge, supports Android OTG transit interface, iOS lighting transit interface, and PC USB transit interface
• Design overvoltage protection (OVP) and a double-filter circuit, support digital and analog signals charging separately, improve power stability and decrease power interference.
• Coaxial&Optical interface transfer HiFi lossless audio to speaker and power amplifier, supports decoding PCM192kHz and DSD64 audio format.
• Wide Compatibility & Coaxial&Optical Dual Audio OutputsThis USB DAC headphone amp is compatible with 3.5mm/4.4 mm BAL/Optical/Coaxial output, Compatible with various systems like Android/iOS/Windows7/10
• HiFi DAC&USB Decoding Format for DSD512 YMOO DS400+ headphone amps adopt the latest ES9038Q2M with 32-bit processing and the XUF208 USB decoding chip, Supports DSD64/128 for iOS, DSD64/128/256 for Andriod, DSD64/128/256/512 for Windows 7/10, DSD64 for Coaxial&Optical.
• Gain/Bass Effect & Turnable Power Volume IndicatorDS400+ features gain/bass switch, supports choosing various music styles for different occasions
• Adopts a turnable volume and power button with LED indicator, provides a visible volume and power state.
• Dual Headsets & Stable ConnectionSupport connecting with two headsets
• (3.5mm headphone output: power is 16Ω/190mW, 32Ω/140.5mW; 4.4mm balanced headphone output: power is 32Ω/300mW, 300Ω/71.6mW, 150Ω/143mW, 600Ω/35mW), Improves the impedance and output ability
• The DS400 adopts a dual crystal oscillators system, avoids disturbance from shaking or moving.

Features

• AK4493S is an upgraded version of the previous AK4493.
• AK4493S: The DX1 uses newest sub-flagship AK4493S chips of AKM’s VELVET Sound technology
• 2 gain settings: DX1 provides 2 gain settings, which greatly expands the range of headphone adaptation.
• DX1 has both 6.35mm and 3
• 5mm headphone output to meet more needs
• No adapter required: Like other USB device, the DX1 does not require an additional adapter for power supply
• Only one USB cable can complete the power supply and data transmission.
• Discrete LNRD: How to solve the noise problem from USB power? The DX1’s answer is the Discrete LNRD circuit (low noise reference driver)
• Even high sensitive IEMs will not bothered by noise.
• With this technology, the noise of DAC part is lower than 2.0uV, and the noise of AMP part is lower than1.0uV
• The Discrete LNRD circuit filters out the noise and interference of USB 5V power and provides stable and clean power supply of ultra-low noise reference level for DX1
• Only for Windows ASIO applications, you need to install the driver and set it up
• The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable.
• Plug and play turn your PC into a HIFI source: DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play

Features

• 500mA Li-Po Battery / 6~20 hours streaming
• Dual ES9218p HiFi DAC 2.5mm Balanced (4V RMS) 3.5mm Unbalanced (2V RMS)
• Qualcomm QCC5124 Bluetooth Chipset HFP / HSP / A2DP / AVRCP LDAC / aptX Adaptive / aptX HD / AAC
• Bluetooth and USB DAC 96KHz/24bit with embedded double-precision equalizer

Features

• Low Noise Floor: Optimized active low pass and BASS circuit design ensure low noise floor in any situation, so your music is truly played back faithfully
• Easy to Operate Design: The refined E10K-TC is tiny enough to carry with you wherever you go but is also right at home on your desk to make your music sound great anywhere, the small yet easy-to-operate design makes it a perfect companion for listening
• A high current amp circuit ensures good output power with great transient response
• Quality Chips to Delight your Ears: The DAC is the PCM5102, with improvements to the flatness and delays of the internal digital filter meaning better sound quality and less audio delay
• Impeccable XMOS Decoding: The E10K-TC comes with the flagship XMOS XUF208 for better USB decoding
• Compared to the original E10K, the USB Audio class has been upgraded to 2.0, and PCM is now supported up to 32 bit/384kHz sampling rates to better capture the details in your music
• High gain is for higher impedance headphones that may need the extra volume, while the bass boost satisfies different listener’s preferences when listening to various types of music
• 2 Gain Levels and BASS Boost: The E10K-TC comes with high/low gain adjustment as well as a bass boost

Features

• Impeccable XMOS Decoding: The E10K-TC comes with the flagship XMOS XUF208 for better USB decoding
• Compared to the original E10K, the USB Audio class has been upgraded to 2.0, and PCM is now supported up to 32 bit/384kHz sampling rates to better capture the details in your music
• Low Noise Floor: Optimized active low pass and BASS circuit design ensure low noise floor in any situation, so your music is truly played back faithfully
• Easy to Operate Design: The refined E10K-TC is tiny enough to carry with you wherever you go but is also right at home on your desk to make your music sound great anywhere, the small yet easy-to-operate design makes it a perfect companion for listening
• High gain is for higher impedance headphones that may need the extra volume, while the bass boost satisfies different listener’s preferences when listening to various types of music
• 2 Gain Levels and BASS Boost: The E10K-TC comes with high/low gain adjustment as well as a bass boost
• Quality Chips to Delight your Ears: The DAC is the PCM5102, with improvements to the flatness and delays of the internal digital filter meaning better sound quality and less audio delay
• A high current amp circuit ensures good output power with great transient response

Features

• Access the full range of audio adjustments via the PC app, or make quick adjustments to your EQ settings from your phone
• Configure each element of your audio settings or switch them off completely via the Creative app
• GAME AND HEAR YOUR WAY – Choose between SXFI BATTLE Mode or Scout and get to winning your FPS game
• All these are powered by our Sound Blaster’s audio promise with 114 dB audio clarity and hi-res 192 kHz/24-bit playback
• The Sound Blaster X4 is also a headphone amplifier that is capable of driving studio-grade headphones of up to 600Ω
• CONNECT WITH EVERYTHING – With a newly added optical-in port, it is now much easier to connect multiple audio devices, from external microphones and headsets, to platforms like your PC, Mac, gaming consoles, and even your multi-channel speaker systems
• Just power up the Sound Blaster X4 via the USB-C port, and enjoy high-quality audio with everything
• After a one-time setup, instantly adjust the volume levels between two audio sources (SPDIF / Optical / USB) with the Audio Balance feature via the volume knob, perfect for communicating with music on
• There are also the Direct Mic Mute, Direct Mode, Super X-Fi and SXFI BATTLE Mode on/off buttons, as well as a speaker (Line-out) and headphones switch button
• EASY ACCESS TO ALL CONTROLS – Pick between three EQ modes or re-program them, and save your settings on the device
• IMPROVED COMMUNICATION WITH SMARTCOMMS KIT AND CRYSTALVOICE – Features our SmartComms Kit, a suite of smart communication features that simplify the way you take work calls on Windows 10 platform
• Turn on VoiceDetect to auto mute and unmute your mic, or get rid of static background noise in your own environment as well as the other parties’ via our two-way noise cancellation feature NoiseClean
• In tandem, CrystalVoice technology enhances voice for clear recordings and in-game communications
• 7.1 DISCRETE SURROUND WITH SUPER X-FI AND DOLBY DIGITAL LIVE – Supports up to 7.1 discrete and virtual surround with three types of surround sound delivery: 1
• Dolby Digital Live
• Sound Blaster Surround Virtualization’s famed surround processing that is driven by algorithms that are capable of optimizing spatial information of incoming audio for a complete and immersive auditory experience, 3
• Super X-Fi technology that recreates the listening experience of a multi-speaker system in headphone, 2

Features

• [High-performance DAC&USB decoding chip]: The K5 Pro ESS headphone amps achieves new heights in sound quality and comes with a high level of resolution sound
• ES9038PRO with 32-bit processing, along with the XUF208 USB decoding chip with 768kHz and DSD256 inputs, and it also upportes mobile phone connectivity.
• [Easily handles low or high impedance headphone]: For a total power output of up to 1.5 W under a 32Ω load, and up to 20Vpp at 300Ω, K5 Pro ESS desktop amplifier can easily handles any low or high impedance headphone.
• [Variety of inputs]: Supports coaxial/optical/RCA line-in inputs, with optical and coaxial inputs supporting up to 192kHz inputs, K5 Pro ESS amplifier is convenient for connecting various music players and digital interfaces.
• [Various headphones with all kinds of sensitivities]: With ADC volume adjustment, K5 Pro ESS portable headphone amplifier allows you to smoothly adjust volume at extremely fine increments without any undesirable noise nor with any channel imbalances
• It means you could comfortably use various headphones with all kinds of sensitivities with it.
• [Variety of outputs]: Supports 6.35mm (1/4 in.) headphone out/RCA line-out outputs, the RCA line-out line signal is adjustable up to a maximum of 2Vrms, so the K5 Pro ESS portable DAC can be used with a variety of active speakers and external amplifiers.

Features

• Perfect for Music : When you use it for music, it can bring you fantastic music enjoyment.DAC-X6 also is really good for FPS gaming.Can use it with dolby atmos and the directional sounds perfectly
• A variety of input and output modes: The amps can be PC-USB, optical fiber, coaxial three inputs, can be connected to TV set-top box, DVD, DCD; output mode has RAC, 6.35mm headphone port 2, can be connected to power amplifier, tube vacuum amp, active speaker
• Headphone and RCA output will emit sound at the same time when the DAC-X6 is working
• You can turn off your active speakers or amplifiers according to your needs
• Unique Design: Compact and adaptable, connect to active speakers via RCA to improve sound quality, or for use as a powerful headphone amp.NOTICE:DAC-X6 volume adjustment only works on headphones
• Chipset: The mini amps chip uses OPA2134PA+6120A2+CS4398+SA9023+OP275G to provide strong guarantee for tone input and output.
• Efficient protection and long life: The audio decoder uses OPA2134 and NE5532P two special op amps specially designed for audio
• At the same time, a relay protectors may protect the headphones and speakers.
• The op amp can be freely replaced and upgraded