10 Best Spark Plug For Car in Australia (2023) [Top Picks]

Features

• Use a feeler gauge to turn the knob until the side electrodes are compressed to the desired gap thickness.
• [Easy to Install] Just put the spark plug into the gap tool
• Use a feeler gauge of the desired size to measure the gap thickness
• Universal for most car models.
• [High-quality Material] This spark plugs gap tool is made of aluminum alloy material, which is sturdy and durable, the size is 16×3.1×3.1cm/ 6.2×1.2×1.2inch
• This spark plugs gap tool will give you the perfect gap every time.
• [Accurate Gap] Just place your spark plug perfectly on the gap tool to get an accurate gap, very easy to use
• [Rebound Notice] Please note that some of the spark plug electrodes will bounce back, this is normal
• If your gap target is 0.44 mm, we recommend using 0.42 mm so that when it bounces back you get 0.44 mm.
• But not compatible with 18mm threads and longer spark plugs
• Please measure the size before purchase.
• [Compatible] This spark plugs gap tool is universally compatible with 10mm, 12mm, 14mm, and 16mm spark plugs

Features

• Iridium Spark Plugs
• Designed to operate over a much wider heat range than ordinary plugs
• Resists carbon buildup and pre-ignition
• Patented triple gasket sealing process eliminates the possibility of combustion gas leakage

Features

• Easy Installation: Just Slip On (Sewn End Over Spark Plug ) For Maximum Protection ,Sleeves Can Withstand Heat Up To 1200 Degrees Using Patented Insultherm Technology
• Each Boot Is 6inch Length,Boots Will Work With 90 Degree, 45 Degree, And Straight Spark Plug Boots
• Set of 8 Black Spark Plug Wire Boot Sleeves,Made From Double Wall Braided Fiberglass Sleeving (Triple Wall At Sewn End)
• Package: 8 Black Spark Plug Wire Boot Sleeves(Note: only fit for vehicles which burning petrol)
• Fits All Spark Plug Boots And Wires Up To 1200 Degrees Fahrenhett (648.89° C)

Features

• Package Dimensions: 3.4″ (L) x 3.3″ (W) x 1.4″ (H)
• Country of Origin: Taiwan
• Package Quantity: 1
• Product Type: Fastener Drive Bit

Features

• FUEL EFFICIENCY: These spark plugs utilize a 0.6mm finewire iridium centerwire tip design with laser welded technology for maximum fuel efficiency
• Our finewire electrodes produce more focused and consistent ignitability resulting in less fuel consumption
• CONSTRUCTION: Every iridium spark plug comes with a platinum protected ground wire for maximum efficiency in all ignition types including DIS systems and a V-trimmed ground electrode for improved ignitability
• AUTOLITE ADVANTAGE: Autolite has been producing spark plugs since 1936 making it one of the most trusted and reliable brands for your OE replacement spark plug needs
• EXTENDED CHANGE INTERVAL: The Autolite Iridium XP automotive replacement spark plug is engineered to last for up to 100,000 miles depending on engine type making it one of the most durable spark plugs on the market today
• OPTIMAL PERFORMANCE: This replacement iridium spark plug provides better durability and a more focused ignition for better overall ignitabilty and optimal performance

Features

• Swivel design provides better access to hard to reach spark plugs
• Manufactured from alloy steel for better strength and longer tool life
• Designed for use with a 3/8-inch square drive tool
• Magnetic insert holds plug for removal and installation
• Rubber insert protects spark plug and centers the socket

Features

• Easy Remove Spark Plugs: 12-Point 14mm Spark Plug Socket Thin Wall with Build-in Anti-Slip Spring retainer clip for easy spark plug removal, which has 64mm overall length, Ø14mm sleeve, 1mm thickness, 3/8-inch (10mm) quarter mouth rim diameter
• This thin-walled spark plug socket works where regular sockets do not fit to remove 12-point spark plugs from vehicles
• Sockets not magnetic but prevent falling into deep spark plugs well
• Does not slip like magnet socket systems, and does not grip too tightly like O-ring sockets
• No more falling into your engine bay: Built-in special leaf spring retainer clip, holds the spark plug firmly in the socket, for easy to remove, with a superior grip
• 14mm spark plug socket will also fit for Mercedes Benz, Nissan, Citroen, Renault 1.2 16v, Peugeot 207 / 307 engines such as the N43, N52, N54, N55, 335, 535, along with lawn mowers and ATVs and many more; *Please check with your engine code or user manual for fitment information
• Fitment: Spark Plug Socket fits for BMW M5 (F10), BMW 318 2007+, BMW 3.0L turbocharged engines such as the N54, N55, N20, N26, S55, N63, B46, B48, and B58; Partial fit for BMW motorcycles engines and fit for MINI vehicles such as the R55, R56, R57, R60
• That’s why our hand-tool sockets always bear the CR-V mark
• Package Contents: 14mm spark plug socket 3/8 Inch drive thin wall 12-point spark plug sockets
• Build to Last: This tools are made from chrome vanadium steel for higher durability, and resistance to corrosion

Features

• INCLUDES 1 x A-Team Performance Spark Plug Wire Boot Heat Shield Rated up to 1,200 Degrees Protector Sleeve Braided Cover Compatible with Car Truck Hot Rod Street Rod Race Car SBC BBC SBF BBF 6″ Long Set 8 PCS Black
• FLEXIBLE – These sleeves fits 45 Degree, 90 Degree and Straight Spark Plug Boots
• DURABLE – Made of double wall braided fiberglass sleeving, guaranteed for long time use
• EASY INSTALLATION – Just slide it on your spark plug boots for maximum protection
• HEAT PROTECTION – These sleeves can withstand heat up to 1200 Degrees due to its Patented Insultherm Technology

Features

• For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
• [3-YEAR WARRANTY]: For damage caused by non-human factors, AUTOOL promise to resend parts for free within 3 years
• [0 to 6000rpm Operating Frequency]: The AUTOOL SPT101 Car Spark Plug Tester is designed with adjustable working frequency, the range can reach 0 to 6000rpm
• Can be adjusted as you required.
• [ Dual Hole Testing& Time Saving]: The AUTOOL SPT101 Car Spark Plug Tester is able to dual-hole simultaneous testing as well as analog engine working, which is much more efficient and time-saving.
• [Widely Application]: 12V Gasoline vehicles car spark plugs, 100V-240V input voltage .
• Come with indicator light, the status of the spark plug can be displayed more intuitively.
• [Easy operation Plug And Play]: Easy operation, plug and play

Features

• SIMPLE INSTALLATION AND SET UP: 2 mounting flanges on each side allow you to mount the spark plug cleaner machine vertically on a wall or post; 3.3-inch (8.4cm) wide and 8-inch (20.3cm) length fits easily and stands 3 inches (7.6cm) from the wall when not in use; Mount with spark plug insertion facing upwards; After filling unit with spark plug cleaner media, secure the 6.3 by 5 inch (16 by 12.7cm) cover to the base using the included clamp
• PROLONG THE LIFE OF YOUR SPARK PLUGS: Are your spark plugs underperforming? Clean them up with the ABN Spark Plug Cleaner Pneumatic Sand Blaster Cleaner with Spark Plug Cleaner Abrasive Sand; Easily remove carbon build-up for like-new performance and prolonged lifespan; Spark Plug Cleaner Tool works with your motorcycle spark plugs, lawn mower spark plugs, vehicle spark plugs and more; Always wear protective gear when in use
• EASY TO USE: Hook your compressor to the spark plug tool cleaner and insert the spark plug (electrode-side down) into the rubber cover at the top of the unit; Turn on the compressor and flip the switch on your pneumatic plug spark cleaner tool to allow air and spark plug blaster sand to gently swirl and clean out carbon build up on your spark plugs; Move plug in a circular motion to allow grit to clean all surfaces; When finished, carefully clean remaining grit from the plug
• BUILT TO LAST: Constructed of a thick, durable plastic base with brass fittings, and a steel clamp provides this air spark plug cleaner sandblaster tool with maximum durability and efficiency; High-quality materials are resistant to rust and abrasion making them ideal for the abrasive cleaning process 1/4 inch NPT air inlet with hose barb fits 3/8 inch air hose
• SPARKPLUG SANDBLASTER CLEANER KIT: Includes a spark plug cleaner unit, a fabric spark plug cleaner bag, an airbag clamp, a 1.7 oz (.1lb) bag of abrasive material, and instructions; Spark plug cleaning tool requires mounting hardware, a union fitting, an air hose, and an air compressor that are not included in the kit; Spark plug pneumatic blasters feature a 7.7CFM air consumption rating and a 90 PSI pressure rating