10 Best Tailpipes in Australia (2023) [Top Picks]

Features

• Wide Applications —— Use the Rubber Hanger Pliers Exhaust Hanger Puller Removal Tool to remove the hanging bracket from the rubber hanger when servicing your vehicle exhaust system; Spring-loaded muffler hanger tool pliers uses optimal leverage to separate parts for easy servicing and to protect your parts from damage.
• Spring Design and 25-Degree Offset —— 25-degree offset handle and 2-inch (5.1cm) faceplate allows for a comfortable hold and optimal leverage when working in tight and hard to reach areas, Spring-loaded muffler hanger tool pliers uses optimal leverage to separate parts for easy servicing and to protect your parts from damage.
• These newer hangers are three to four times wider than the old style.
• Easy to use, well made, and very strong —— Right tool for the job, Without this tool it would have taken you hours instead of minutes to remove these new style exhaust hangers
• Yell for your wife to bring out the bandages for your busted knuckles.
• Just buy these, you’ll thank yourself later, otherwise lay under your truck screaming and swearing
• Exhaust Hanger Tool —— Get this tool and use them to install a new cat back exhaust system on your car
• These sure do come in handy, saved you time and frustration
• Squirt of penetrating oil and the exhaust hangers come right off! Very little effort required.
• It was a really big help with the removal of your stock exhaust
• What You Get —— In this kit, You will 1Pcs 25 Degree Offset Rubber Exhaust Hanger Removal Pliers, 25 degree offset handles for work in hard to reach areas

Features

• FITMENT: This exhaust tips fit pipes measuring between 2 and 2.75 inches in diameter.
• MATERIAL: This muffler tips are made by high quality stainless steel with black coating.
• INSTALLATION: Clamp-on installation : They are attached to the tailpipe by clamps and screws (Included).
• MEASURE FIRST : Please measure your own pipe and bumper cutout, and compare to this product fitment size.
• SIZE : / Length 6” / width 3.5” / Inlet Diameter 3” / Outlet Diameter 3.5”

Features

• Size: 3 (W) x 44 (L)
• Chemical Solvent Resistance: automotive fluids and oils, road salt
• Set Time: 20 minutes
• Temperature Range: up to 1900 F

Features

• There is 1 year warranty for each purchase
• Before you buy, please make sure the Brand Logo “Upower”.
• Materials: Made of 304 Stainless steel has very strong anti-corrosive, Never Rusty.
• Pack of 1 dual exhaust tip; Weld On – Professional installation is highly recommended; No instruction included
• Double Wall Slant – Angled Cut – Rolled Edge design
• ( For all tailpipes, if the outlet size is 2.5inch, then this exhaust tip can fit, no matter of your Year/Make/Model)
• Please measure your exhaust pipe outlet size, The outlet size of your exhaust pipe is matched the inlet size of exhaust tip ,it can fit 2.5 inch of your exhaust pipe outlet size

Features

• Applicable to all kinds of cars, motorcycles and racing cars.
• The bigger of the size, the louder of the sound.
• Easy to install on the car’s tailpipe.
• Make your vehicle sound like a turbo vehicle with the turbo system or blow off valve.
• Aluminum alloy material, solid installation, loud sound.

Features

• Easy to install on the car’s tailpipe.
• After installed this product, the pressure blowing out of your exhaust will make your vehicle sounds like a turbo vehicle with the turbo system or blow off valve.
• Made of high quality aluminum, light weight and durable.

Features

• Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches outlet diameter exhaust pipes.
• Dimensions: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 12’’ dimension ( Inlet, Outlet and Length )
• If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists.
• Warranty: 100% satisfaction
• It will protect your your exhaust pipe from rust and corrosion under sunlight and rain.
• Function: The Apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter of 2.5 inches
• Just make sure that this is is correct size for your exhaust pipes.
• Installation: Bolt on design and this tailpipe tip can be installed directly
• It makes your vehicle look much more shinny
• And there is a little hole on button
• It will help to drain water avoiding rust and corrosion.
• The surface is coated with black powder
• And the tip has a rolled edge with nearly 20 degree cut
• Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel

Features

• Materials: Made of 304 Stainless steel has very strong anti-corrosive, Never Rusty.
• Weld On installation and Double Wall Slant design
• Before to buy, please make sure the Brand Logo “Upower”.
• There is 1 year warranty for each purchase
• Fits: To ensure proper fit make sure your exhaust INLET diameter is 2.5 Inch
• Pack of 2 exhaust tips; Professional installation is highly recommended; No instruction included

Features

• Notice Please measure the outlet diameter of your exhaust pipe prior to purchasing.
• MaterialHigh quality durable chrome stainless steel exhaust tips, Coated with Silver Powder.
• Dimension2.5 inch inside diameter Inlet, 2.5 inch outside diameter outlet, 9 inch Overall Length, High quality durable chrome stainless steel exhaust tips, Coated with Black Powder.
• Installation Bolt on install, clean your vehicle tailpipe, Unscrew the screws before sliding the tip on and secure the screws by tightening the screws
• (Note): Additional welding may be useful if the fit isn’t tight enough.
• DesignStainless-Steel & Black Paint, Double Anti-rust, Anti-deformation.

Features

• Stable performance, high reliability, exquisite workmanship.
• Suitable for Benz GLC GLE 2020-2021
• Enhance visibility
• Decorate your car charming luxury vivid.
• Easy to install, don’t need modification, perfect fit for your car
• Made of hig quality ABS material, anti-rust, colorfast and durable.